Skip to content

Antique, vintage & signed jewelry

0 items in cart

Cart

Your cart is empty.

Ring Size Guide

Page content

Find your ring size

A comfortable fit should slide over the knuckle with gentle resistance. For the most reliable result, have your finger measured by a professional jeweller. Home measurements are a useful starting point, and our laboratory will confirm the requested size before work begins.

1. Measure a ring that already fits

  1. Choose a round ring that fits the same finger on the same hand.
  2. Lay it flat and measure the inside diameter, straight through the centre from one inner edge to the other. Do not include the metal band.
  3. Read the measurement in millimetres and compare it with the diameter column below. A digital calliper is more precise than a ruler.

2. Measure your finger

  1. Wrap a narrow strip of paper or a non-stretch measuring tape around the base of your finger. It should be snug, without compressing the skin.
  2. Mark where the strip meets, lay it flat and measure the length in millimetres. This is your finger circumference.
  3. Check that the loop passes over your knuckle. Repeat the measurement several times at different times of day, with your hands at a normal temperature.

Example: a circumference of approximately 54 mm, or an inner diameter of approximately 17.2 mm, corresponds to Italian size 14 / EU 54.

Ring size conversion chart

Approximate ring size conversions
Italy EU / circumference (mm) Inner diameter (mm) US ≈ UK ≈
4 44 14.0 3 F ½
6 46 14.6 3 ¾ H
8 48 15.3 4 ½ I ½
10 50 15.9 5 K
12 52 16.6 6 L ½
14 54 17.2 7 N ½
16 56 17.8 7 ½ P
18 58 18.5 8 ½ Q ½
20 60 19.1 9 S
22 62 19.7 10 T ½
24 64 20.4 10 ½ V
26 66 21.0 11 ½ W ½
28 68 21.6 12 ¼ Z
30 70 22.3 13 —

EU sizes correspond approximately to the inside circumference in millimetres. The Italian reference is EU circumference minus 40: for example, 54 − 40 = 14. Diameters are calculated from circumference ÷ π and rounded to one decimal place. US and UK equivalents are approximate and can differ by brand and measuring method. Intermediate and other sizes are available for assessment: contact us if your measurement falls between the rows.

Before requesting resizing

  • Avoid measuring very cold, hot or swollen fingers. Wide bands and stacked rings can require a different fit.
  • If you are between sizes, send us the exact millimetre measurement rather than rounding up or down.
  • The current size is stated in the product description. Tell us the sizing system as well as the number, for example “Italian size 14”.
  • Some antique, engraved, stone-set, flexible or full-eternity designs cannot be resized. Feasibility and additional preparation time are confirmed individually before work begins.

Request another size

Select “Request another size” on the product page where offered, then enter your requested size and sizing system. For advice, send us the jewel reference and your measurement.

Ask for sizing advice · Contact us on WhatsApp